top of page
Image by Patrick Robert Doyle

Materials We Stock

Come in and see our fine selection at the best prices!


We carry a complete line of the finest furniture grade hard and soft wood lumber for all your projects small and large. Our plywood is also equal in quality for cabinet building or whatever your project might be. Our lumber selections include 12/4 and 16/4 planks for mantel building.

Current Pricing (Please Call or Email for our pricing)


Kiln Dried - 6 to 8 percent moisture content

FAS, FEQ, and Pattern Grades available

Board lengths from 8’ to 16’

Most Lumber surfaced two sides (S2S) to dimensions required

Finish cuts and planing to thickness available

Species we Carry:

Red Oak, White Oak, Cherry, Ash, Mahogany, Walnut, Poplar, Hard Maple, Birdeye Maple, Tiger Maple, Soft Maple

Butternut, Pine C-select Furniture grade, Quarter Sawn Sycamore, Quarter Sawn White Oak (12+), European Steamed Beech

Teak, Basswood, Hickory, Natural Birch, Sapele

Board Sizes: 4/4 (13/16"), 5/4( 1 1/16"), 6/4 (1 1/4"), 8/4 (1 3/4"), 10/4 (2 1/4"), 12/4 (2 3/4"), 16/4 (3 3/4") 

 *Prices subject to change without notice. Call for exact pricing!


4x8 sheets unless noted  

Special or Finish cuts available  

Veneer Core

Paper and wood back Veneers available for intricate projects

Species we Carry:

Plain Sliced Oak, Cherry, Maple, Mahogany, Walnut, Baltic Birch, Maple #2 paint grade, Teak & Holly, Okoume, 

Marine A/B Fir, MDF, Pre-finished Maple (clear), Many wood veneers available too

Thickness: 1/8", 1/4", 3/8",  1/2", 3/4", 5/8" 

 *Prices subject to change without notice. Call for exact pricing!

All prices are for shop pickup only. Call or email for prices not listed below in the chart or for UPS deliveries. All lumber is FAS grade unless noted below. All lumber is sold by the board foot. Board feet is calculated based on lumber thickness prior to surfacing.
Note: Prices in red indicated below are sale priced (while supplies last).

Definitions and Examples:

To calculate board feet, multiply the length in feet by the width and thickness in inches. Divide that amount by 12.

(L (feet) x W (inches) x T (inches) 12=8 x 9 x 1/12= 6 BF

A board 8 feet long and 9 inches wide by 1 inch thick contains 6 board feet (BF) of lumber.

This sample board has a surface measure (SM) of 6. That's the number of board feet divided by the thickness.

All grades are assigned at the sawmill at the time of manufacture.  Grades that we carry include:

FAS  which is the best grade, must be 83% clear on the poorest side. Clearness is measured in large rectangular areas called cuttings. FEQ and Pattern grades are also carried for select items.

Sample Cuts


Wood Grain Samples

bottom of page